What industries can alumina ceramics be used in?

Alumina ceramics is a kind of ceramics with a wide range of uses. Because of its superior properties, it is more and more widely used in modern society, and it basically meets the needs of daily use and special properties.

Alumina ceramics have good high temperature resistance, high mechanical strength and good conductivity. However, one thing to note is that when cleaning the ceramics, one must use ultrasonic waves for cleaning, and other items must not be used for cleaning, because alumina ceramics is a very special material.

The density of alumina ceramics is very small. Its density is 3.5 grams per cubic centimeter, which is half the density of steel. Generally, in the case of the same volume, the mass of alumina ceramics is only half that of steel, which shows that it is very light. Therefore, when in use, the load of the equipment can be greatly reduced, so that other equipment can work without any pressure. On the one hand, it can improve work efficiency, and on the other hand, it can reduce the failure rate of equipment, which also reduces the production of the enterprise. cost.

Alumina ceramics have very good wear resistance. The wear resistance of alumina ceramics is more than 200 times that of manganese steel. Therefore, under the same conditions, it can significantly extend the service life of the equipment, even as long as ten years.

According to the measurement structure of related institutions, the hardness of alumina ceramics is only second to that of diamond. It can be seen that its hardness is not comparable to other materials.

The surface structure of the alumina ceramic tube is finished, so that the ceramic tube is not easily damaged under the action of external hard objects, and the ceramic tube has a strong anti-beating ability.

Alumina ceramics have high toughness, high flexural strength, high wear resistance, comprehensive thermal insulation performance and low thermal expansion coefficient. It is widely used in aerospace, military, electrical appliances, refractory materials, chemical industries and other industries.

From the perspective of the application of alumina ceramics, the application range is getting wider and the amount is increasing, especially the increase in the amount of anti-wear engineering and the production of architectural ceramics will be more obvious.