China Industrial High Alumina Ceramic Roller

Description

China Industrial High Alumina Ceramic Roller a slender ceramic cylinder, and both ends of the cylinder wall of the ceramic cylinder are provided with openings, which can be one or two. Through the opening, combined with the metal sheet or the ceramic sheet.

Data sheet of Alumina Ceramic Rollers

Reasonable use of China Industrial High Alumina Ceramic Roller

1. It is generally better to cool down to 800 ℃ when replacing the rollers in a centralized manner. The rollers should be loaded or withdrawn from the kiln as quickly as possible, and the withdrawn rollers should adopt the correct cooling method to prevent local quenching from causing wind crystals.

2. When the rod is drawn at high temperature, the roller should be quickly and rotated. It is best to place it on a special rotating bracket padded with refractory cotton and keep it rotating until the temperature drops below 600 degrees, or cover with insulation cotton to make it slow. cool down. The drawn out hot rollers should not be in direct contact with the ground, and avoid contact with cold metals and objects with a large temperature difference between the rollers.

3. After the replaced sticky roller is ground, its straightness and diameter must be carefully checked for reuse.

Packing& Delivery

It is usually packed in exported wooden case.

Delivery time  is within 25-35days.

Hot Tags: china industrial high alumina ceramic roller, China, suppliers, manufacturers, factory, customized, wholesale, cheap, pricelist, low price, free sample, cost to replace heating element in furnace, heating element for intertherm furnace, ceramic fiber rope density, refractory ceramic fiber gasket, 1 x36 x48 ceramic fiber board sheets, alumina ceramic pipe