Weldable Ceramic Tiles Oxide Ceramic Wear Plate with Dovetail Groove

Our ceramic fiber blanket density, 3mm ceramic bushings, alumina ceramic tubes hs code is trusted and supported by our customers, which has led to the rapid development of our company into a large-scale enterprise. Our company fully enjoys the advantages in technology, knowledge, information, capital and other aspects brought by the industrial chain, and constantly improves its competitiveness to maintain its dominant position in the market. We hope to make our business partners the most trustworthy friends and retain our customers and occupy the market with sincere hearts. Our company is committed to 'honesty, quality first', only to achieve this goal can we be invincible in the fierce competition of the market.

Description

Alumina ceramic plate is widely used in sheller blades, textile industry guide wheels, ceramic guide rails and other industries.

Properties of Alumina Ceramic Plate

With the characteristics of high density, good wear resistance, corrosion resistance and high chemical stability.

Craftsmanship

Powder preparation

The alumina powder entering the factory is prepared into powder materials according to different product requirements and different molding processes.

The particle size of the powder is below 1μm. If high-purity alumina ceramic products are manufactured, in addition to the alumina purity of 99.99%, ultra-fine pulverization and uniform particle size distribution are required. 

When extrusion molding or injection molding is used, binder and plasticizer should be introduced into the powder, generally thermoplastic plastic or resin with a weight ratio of 10-30%. The organic binder should be at a temperature of 150-200 with alumina powder.

Mix uniformly under the bottom to facilitate the molding operation. The powder raw material formed by the hot pressing process does not need to add a binder. If semi-automatic or fully automatic dry pressing is used, there are special technological requirements for the powder, and the powder needs to be processed by spray granulation to make it spherical, so as to improve the fluidity of the powder and facilitate the automatic filling of the mold during the molding. wall. In addition, in order to reduce the friction between the powder and the mold wall, it is necessary to add 1 to 2% of lubricants, such as stearic acid, and binder PVA.

When dry pressing is desired, the powder needs to be sprayed and granulated, and polyvinyl alcohol is introduced as a binder. A research institute in Shanghai developed a water-soluble paraffin to be used as a binder for Al203 spray granulation, which has good fluidity under heating. The powder after spray granulation must have good fluidity, loose density, and flow angle friction temperature less than 30℃. Ideal particle gradation ratio and other conditions to obtain a larger green density.

Data Sheet

Q&A

1. What is our advantages?

We have stable products quality and delivery time and we also have rich experience in exporting field.

2. What is the working temperature?

The working temperature is usually at 1700℃.

The existence of each of our Weldable Ceramic Tiles Oxide Ceramic Wear Plate with Dovetail Groove must have its special value, and there is a corresponding positioning from the production of products. In the development process, we actively participate in social welfare undertakings and spare no effort to benefit the society. In recent years, we have achieved double improvement of development speed and quality.

Hot Tags: alumina ceramic plate, China, suppliers, manufacturers, factory, customized, wholesale, cheap, pricelist, low price, free sample, ceramic fiber insulation tape, stove heating element, ceramic water pipe, ceramic fiber tape uae, vermiculite seal vs high alumina ceramic seal vssilicone rubber gasket sheets, full ceramic zro2 si3n4 spinner