PTC Ceramic Heating Element and Electric Heating Element for Cloth Dryer Heater

We are willing to work with all knowledgeable people to develop and promote more environmental protection and higher performance machinability alumina silicate ceramic rods, ceramic fiber round braided rope, refractory ceramic fiber blanket! We adhere to the green and low-carbon strategy and strive to be a good promoter of green development. We are committed to strengthening the quality consciousness of the whole staff, with continuous improvement as the ultimate goal. Our company has established a set of scientific, rigorous and complete quality control and internal management system to strengthen the company's brand effect. Over the years, we have been adhering to the corporate philosophy of "integrity, efficiency, and cooperation", and in accordance with the quality policy of "everything is qualified and satisfied everywhere", we have established good cooperative relations with various manufacturers.

Products Description

MoSi2 heating element has unique high temperature oxidation resistance. Silicon molybdenum rod is a kind of resistance heating element made of molybdenum disilicide, and it is also a commonly used electric heating element. The advantages of silicon molybdenum rod electric heating elements are good temperature resistance, strong oxidation resistance, and long service life. They are commonly used in industrial production, especially for processes with higher working temperatures.

The resistance of the silicon molybdenum rod is related to its working temperature. During the heating process, the resistance of the silicon molybdenum rod will change and gradually increase with the increase of temperature. When the temperature is constant, the resistance of the silicon molybdenum rod will also stop increasing. And remain stable. If there is no abnormality in use, the resistance of the silicon molybdenum rod will not change due to the increase in use time, so it is possible to mix the new and old silicon molybdenum rods.

Data sheet

Density: 5.6～5.8g/cm³

Flexural strength: 20MPa(20℃)

Vickers hardness (HV): 570kg/mm²

Porosity: 0.5～2.0%

Water absorption: 0.5%

Thermal elongation: 4%

Radiation coefficient: 0.7～0.8 (800～2000℃)

Q&A

1. Where is the delivery port?

Usually shipping by sea.The delivery port is mainly in Qingdao, Tianjin and Shanghai sea port.

However, because the weight is not heavy, most of our clients choose the shipping way of air. Our airport is mainly in Beijing international airport, Shanghai international airport and Shenzhen international airport.

2. Why choose us?

We have competitive price, on time delivery time and strict quality supervise.Our products are sold all over the country and exported to more than ten countries and regions such as the United States, Germany, Britain, Japan, India, Eastern Europe, the Middle East, Hong Kong and Taiwan, Southeast Asia, etc., and are trusted by users

Our PTC Ceramic Heating Element and Electric Heating Element for Cloth Dryer Heater are going to all parts of the country and overseas markets. We are committed to let you truly realize that our products are properly around you. When the enterprise pursues the goal of sustainable operation, it should have a deep thinking on the concept and practice. After years of accumulation, our company has established close and friendly cooperative relations with many multimedia at home and abroad.

Hot Tags: heating element, China, suppliers, manufacturers, factory, customized, wholesale, cheap, pricelist, low price, free sample, Silicon Nitride Heater Tubes, ceramic fiber packing rope, nitride bonded silicon carbide thermocouple tubes, fiberfrax ceramic fiber bulk, kiln furnace heating element, hot water heater element