Nijiii/0101.06/PE Sic/1.85kg/M855 M80/Strike Face Ceramic Armor Plate

We have achieved gratifying results in many aspects such as the construction of the scientific and technological innovation system and the research and development of new electric hot water heater element replacement, ceramic bead heat packs, porous alumina ceramic rod. Not only do we have the flexibility and responsiveness, we also pay close attention to the specific needs of each individual customer. Our company relies on science and technology to develop products, the enterprise is full of vitality, and the products are widely used at home and abroad. In order to meet the needs of our customers and the market, we have been committed to the development, research and design of new products. Our company sincerely hope to create and share success with all customers and bring extra profits to every customer.

Description

Alumina ceramic plate is widely used in sheller blades, textile industry guide wheels, ceramic guide rails and other industries.

Properties of Alumina Ceramic Plate

With the characteristics of high density, good wear resistance, corrosion resistance and high chemical stability.

Craftsmanship

Powder preparation

The alumina powder entering the factory is prepared into powder materials according to different product requirements and different molding processes.

The particle size of the powder is below 1μm. If high-purity alumina ceramic products are manufactured, in addition to the alumina purity of 99.99%, ultra-fine pulverization and uniform particle size distribution are required. 

When extrusion molding or injection molding is used, binder and plasticizer should be introduced into the powder, generally thermoplastic plastic or resin with a weight ratio of 10-30%. The organic binder should be at a temperature of 150-200 with alumina powder.

Mix uniformly under the bottom to facilitate the molding operation. The powder raw material formed by the hot pressing process does not need to add a binder. If semi-automatic or fully automatic dry pressing is used, there are special technological requirements for the powder, and the powder needs to be processed by spray granulation to make it spherical, so as to improve the fluidity of the powder and facilitate the automatic filling of the mold during the molding. wall. In addition, in order to reduce the friction between the powder and the mold wall, it is necessary to add 1 to 2% of lubricants, such as stearic acid, and binder PVA.

When dry pressing is desired, the powder needs to be sprayed and granulated, and polyvinyl alcohol is introduced as a binder. A research institute in Shanghai developed a water-soluble paraffin to be used as a binder for Al203 spray granulation, which has good fluidity under heating. The powder after spray granulation must have good fluidity, loose density, and flow angle friction temperature less than 30℃. Ideal particle gradation ratio and other conditions to obtain a larger green density.

Data Sheet

Q&A

1. What is our advantages?

We have stable products quality and delivery time and we also have rich experience in exporting field.

2. What is the working temperature?

The working temperature is usually at 1700℃.

In order to provide more high quality Nijiii/0101.06/PE Sic/1.85kg/M855 M80/Strike Face Ceramic Armor Plate to our customers, we also cooperate with other manufacturers in a wider range of fields. We will contribute to the creation of customer value by leveraging our diversified global management resources. Through independent research and development and industry-university-research cooperation, we continue to increase research and development of new products and new materials, and continuously improve product quality and product grades.

Hot Tags: alumina ceramic plate, China, suppliers, manufacturers, factory, customized, wholesale, cheap, pricelist, low price, free sample, ceramic tubes suppliers, ceramic pipe bowl, ceramic fiber paper 1 8, heating elements furnace parts, Reaction Bonded Silicon Carbide Plate, inert alumina ceramic balls