China 1 4 ceramic fiber arch paper Manufacturers Factory Suppliers
-
Thickness:1mm-10mm.
Made by wet molding process.
Temperature 1260℃/1430℃. -
Ceramic Fiber Board Insulation
Sizes: Thickness 5mm-100mm
Width:600-610mm
Length: 900-1000mm
Bulk density:280-320kg/m3 -
Refractory fiber blanket
Standard size
25x600x7200mm 50x600x3600mm Working temperature
1260℃/1430℃ -
Kaowool ceramic fiber blanket
Classification temperature:1260℃/1430℃ Bulk density: 96kg/m3, 128kg/m3 -
High Temperature Ceramic Fiber
Size: 2mm/3mm/5mm/6mm/10mm Bulk density:200kg/m3 Woking tempeture:1260℃/1430℃
-
1260℃ Ceramic Fiber Board Pricelist
Ceramic Fiber boards
Bulk density: 280kg/m3-320kg/m3
Working temperature: 1260℃-1600℃
Thickness: 5mm/20mm/25mm/50mm/75mm/100mm
Width: 610mm Length:900-1200mm -
Type: Swing and blowing
Temperature: 1260℃/1430℃
Packing:vacuum packaging -
Ceramic fiber board is aluminum silicate fiber board, made of refractory material.
It also maintains good mechanical strength after heating.
It is more rigid and supportive than fiber... -
Working temperature 800℃-100℃
Environmentally friendly
Low thermal conductivity -
Bulk density : 96kg/m3 ~ 160kg/m3. Working temperature: 1260℃/1430℃ Size: According to your request
-
Working temperature: 1100℃
Widely used in chemical, electric power, paper making, food, pharmaceutical and other industries -
The ceramic fiber module is a new type of refractory lining product
Speed up the construction of the kiln and improve the integrity of the lining.
Standard size is 300x300x300mm,...
28 rows · 10Gtek's 1.25G SFP-BD-40-U/D (pair) is a pair of 1.25Gbps SFP BiDi transceivers, supporting up to 40 km over single LC SMF fiber, following IEEE 802.3ab and SFP MSA 1000Base-EX. These BiDi...
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 40km transmission distance with SMF. The transceiver consists of three sections:...
Operating Data Rate up to 1.25Gbps 1310nm DFB laser transmitter 40km with 9/125 μm SMF Single 3.3V Power Supply and TTL Logic Interface Hot...
Jan 11, 2017 · It supports dual data-rate of 1.25Gbps/1.06Gbps and 40km transmission distance with 9/125um single mode fiber. This 1G SFP EX...
High quality DFB-LD DDM 1.25Gb/S 40Km LC BIDI SFP Module 1310nm Tx from China, China's leading 40Km LC BIDI SFP Module product, with strict quality control 1.25Gb/S BIDI SFP...
LC Duplex Type, VCSEL+PIN Double Bandwidth by Using Only One Fiber For Fast Ethernet and Data Center Hot Pluggable SFP MSA Compliant Skip to content Free shipping on orders over...












