Ceramic Fiber Module Installation Procedure

Ceramic Fiber Module Installation Procedure Product Description

The ceramic fiber module is made from ceramic fiber blanket and the main density is 170kg/m3. Ceramic Fiber Module Installation Procedure is usually divided into folding blocks, slice blocks, Palo blocks, and vacuum forming blocks  depending on different molding methods.

Installation Precautions of Ceramic Fiber Module Installation Procedure

1. Check whether the specifications and dimensions of the ceramic fiber module are up to standard, whether the module is complete, whether it is damp or squeezed, and can be used after removing the above conditions.

2. Check supporting products, such as ceramic fiber backing blanket, compensation blanket, U-shaped nails, curing agent, installation wrench, etc.

3. Do a good job of derusting and cleaning the furnace plate in the early stage, draw lines according to the construction drawings, weld the anchor nails, and the anchors should be located in the center of the meter width. For conventional modules of 300*300*300mm, the lateral distance of the welding screws is 300mm, and the longitudinal distance is 325-330mm, subject to the construction drawings.

4. After installing the module, it is necessary to fill up the gap of the furnace lining and fill the fiber blanket, and the surface is repaired and then sprayed with curing agent.

Main specifications

L300xW300xH300mm

L300xW300xH250mm

L300xW300xH200mm

Q&A

1. What is the classification temperature of Ceramic Fiber Module Installation Procedure?

The classification temperature ranges from 1050℃ to 1400℃

2. What is the delivery port in China?

SHANGHAI, QINGDAO, TIANJIN or as per your request.

Hot Tags: ceramic fiber module installation procedure, China, suppliers, manufacturers, factory, customized, wholesale, cheap, pricelist, low price, free sample, SIC Heating Elements, Ceramic Fiber Textile, Ceramic Fiber Module, Electric Heating Elements, Ceramic Fiber Rope, Alumina Ceramic Tiles