What Is The Shape Of The Equal Diameter Silicon Carbide Rod?

In a normal atmosphere, when the furnace temperature is 140 °C, the continuous service life can reach more than 2000 hours, and the intermittent use is about 1000 hours. The furnace temperature is below 1000, and the service life is as long as 5000 hours. Except for the rod shape, It can also be made into a tube shape or a tube shape with threaded juniper. Various products are produced in my country.

The equal-diameter silicon-carbon rod electric heating body is made into a straight rod shape at the early stage of development, with a thin heating part in the middle and a thick lead part at both ends. With the structural design of the resistance furnace and the advancement in the manufacturing technology of the silicon-carbon rod electric heater, it has been made into a variety of shapes. In order to reduce the diameter of the outlet hole of the furnace wall to increase the strength of the furnace wall and reduce the heat loss, the same thickness of the press was developed. In order to overcome the difficulty of leading out at both ends of the electric furnace, one end of two silicon carbide rods or three silicon carbide rods can be connected together. In order to increase the resistance of the electric heating body, it is developed into a spiral electric heating body.